The meter's low flow indicator keeps turning with everything shut off
Once we are on the job site, that little triangle or dial moving with no fixture running proves water is escaping somewhere on the supply side.
Source of the water
Georgia
Our hands-on restoration team uses moisture numbers and targeted inspection to locate hidden leaks and define how far the water has spread.
Signs to keep an eye out for
Before we get to work, if you notice any of these problems, call us before water has more time to spread into nearby materials.
Once we are on the job site, that little triangle or dial moving with no fixture running proves water is escaping somewhere on the supply side.
In plain words, smart meters flag flow that never drops to zero across a whole day. In plain words, those alerts frequently show up before any water is visible inside the building.
Before we get to work, pressurized water escaping through a small opening makes a steady high frequency sound.
In plain words, an underground service line leak waters the ground above it long before it surfaces. Before we get to work, follow the line from the meter toward the house and keep an eye out for the anomaly.
Once we are on the job site, evaporation accounts for right around a quarter inch daily in most conditions. In plain words, consistently more than that, especially with the pump off, points to the shell or the pool plumbing.
In plain words, a cracked lateral or a valve that will not seat keeps feeding one zone continuously.
What happens
Our hands-on restoration team adjusts the work to what got wet, how far the water traveled, and which materials can be saved.
Once we are on the job site, supply, drain, irrigation, pool and hydronic heating all leak differently and are found with different methods.
Before we get to work, we watch the water meter while closing isolation valves one at a time, section by section.
To straighten this out, the main is closed and a pressure gauge is fitted at a hose bib or a laundry connection.
In plain words, isolating at the hot water outlet splits the system in half. Before we get to work, knowing which half leaks halves the search area before any listening starts.
Before we get to work, an acoustic listening device and a ground microphone amplify the sound of water escaping under pressure.
To straighten this out, a leak noise correlator places sensors at two access points and calculates the leak position from the tiny difference in arrival times.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
What to expect
Here is how we as a rule handle leak detection near Georgia.
To straighten this out, meter movement, a wet spot, a sound, a bill, or a failed pressure test all start the search in different places.
Your callOnce we are on the job site, close every fixture, then look at the water meter and note whether the low flow indicator moves. Before we get to work, let us know the answer when we get there, since it aims the whole visit.
+10 minutesBefore we get to work, we confirm whether this is supply, drain, irrigation, pool or heating.
On arrivalOnce we are on the job site, sections are closed one at a time while the meter is watched. In plain words, each closure that stops the flow shrinks the search area, frequently by more than half.
First 20 minutesBefore we get to work, a gauge on a closed system tells us whether pressure holds, and how fast it falls if it does not.
Next 20 minutesIn plain words, we map where the pipe runs, then listen along it with a ground microphone or a wall probe.
Mid visitBefore we get to work, long buried runs get a leak noise correlator, and quiet or plastic lines get tracer gas.
As neededUnderstanding the cost
We spell out the recommended work and price before you approve the job. These examples show what may change the price breakdown.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Standard leak detection visit, accessible plumbing, one system | National price breakdown for isolation, pressure testing and an acoustic sweep with a marked location. | $150 to $400 |
| Slab leak location using acoustic listening with thermal screening | National price breakdown. The common band for locating a leak under a slab on grade. | $250 to $600 |
| Underground water service line leak location between the meter and the house | National price breakdown including line tracing and correlation on a buried run. | $300 to $800 |
| Tracer gas testing where acoustic methods cannot isolate the line | National price breakdown. Used on plastic pipe, low pressure lines and noisy sites. | $350 to $900 |
| Pool or irrigation line leak location | National price breakdown. Pressure testing each line and zone, then locating the failed section. | $300 to $700 |
| Written detection report with photographs for a carrier or a builder | National price breakdown added to the detection fee when formal paperwork is required. | $100 to $300 |
| After hours or emergency detection dispatch | National price breakdown for nights, weekends and holidays, billed once rather than per hour. | $100 to $400 nationally |
Which system is leaking
Once we are on the job site, a supply line under pressure is the most locatable.
Whether the pipe route is known
Before we get to work, if nobody knows where the line runs, tracing has to happen before listening can start.
Slab, wall, crawl space or underground
Once we are on the job site, an accessible wall or crawl space is quick.
Pipe material and depth
Before we get to work, metal pipe carries leak sound well and is easier to hear.
Background noise conditions
Once we are on the job site, traffic, machinery, wind and a busy building all mask the sound of a leak.
Access and what has to be moved
To straighten this out, furniture, stored goods, landscaping and finished surfaces all slow the sweep down. In plain words, access is labor, and labor is most of this invoice.
Why timing matters
Once we are on the job site, water can keep moving into nearby materials even when the surface looks dry.
In plain words, two or three wrong holes in tile, drywall and flooring exceed a detection fee quickly, and the repairs are visible afterward.
To straighten this out, replacing the section somebody suspected is how a stain returns three weeks later.
Once we are on the job site, a pressurized leak runs continuously, unlike a drip that only leaks when a fixture is used.
Before we get to work, a leak under or near a foundation moves soil as well as water. Once we are on the job site, voids that form there are far more costly to correct than the pipe ever was.
Helpful service information
In plain words, start with the short explanation. Once we are on the job site, open a card if you want a little more detail.
To straighten this out, the first move is deciding which system is losing water: pressurized supply, gravity drain, irrigation, pool plumbing or a heating loop.
Before we get to work, leak detection is a process of elimination, and the tools come last. To straighten this out, the first move is deciding which system is losing water: pressurized supply, gravity drain, irrigation, pool plumbing or a heating loop.
A ground microphone on concrete or soil, or a probe against a wall, amplifies it while filtering traffic and machinery out.
Acoustics work since pressurized water forced through a small opening makes a steady, characteristic sound. A ground microphone on concrete or soil, or a probe against a wall, amplifies it while filtering traffic and machinery out.
In plain words, the line is drained and charged with a hydrogen and nitrogen mix, safe and non toxic at the concentrations used.
In plain words, when nothing can be heard, tracer gas takes over. In plain words, the line is drained and charged with a hydrogen and nitrogen mix, safe and non toxic at the concentrations used.
Help near you
Choose your area below, or call (833) 493-2559 and describe what happened.
You may also need
Our hands-on restoration team uses meters and thermal imaging to find hidden moisture, mark areas that got wet, and guide a focused drying plan.
Get a Quote: (833) 493-2559Our hands-on restoration team locates moisture from slab leaks and dries flooring, walls, and contents affected by water rising through the foundation.
Get a Quote: (833) 493-2559Our hands-on restoration team extracts water from leaking pipes, checks nearby cavities and flooring, and dries materials affected before the leak was found.
Get a Quote: (833) 493-2559Our hands-on restoration team cleans up plumbing leaks and overflows, removes water left standing, and dries walls, floors, cabinets, and nearby rooms.
Get a Quote: (833) 493-2559Our hands-on restoration team handles damage from a burst pipe by extracting water, opening wet cavities, and drying affected building materials.
Get a Quote: (833) 493-2559Our hands-on restoration team identifies the water source, measures visible and hidden moisture, documents damage, and recommends an appropriate cleanup and drying plan.
Get a Quote: (833) 493-2559Our hands-on restoration team handles high-volume water from a main break with extraction, moisture mapping, damaged-material removal, and structural drying.
Get a Quote: (833) 493-2559Our hands-on restoration team finds moisture inside walls and uses targeted drying or controlled removal to protect framing and nearby finishes.
Get a Quote: (833) 493-2559Common questions
Once we are on the job site, it is the service of locating the source of an escaping water leak without demolishing the building to find it.
Once we are on the job site, they answer opposite questions. Before we get to work, detection finds where the water is coming from so it can be repaired. Once we are on the job site, moisture mapping measures how far the water has already spread so the right materials get dried.
In plain words, that is the entire point of the service. Before we get to work, acoustic listening, correlation, line tracing and tracer gas all work from the surface.
To straighten this out, on a pressurized metal line in reasonable conditions we are frequently within a foot. To straighten this out, plastic pipe, deep burial and heavy background noise widen that.
To straighten this out, no. Before we get to work, we locate, mark and document, and your plumber makes the repair. Before we get to work, keeping those roles separate is what keeps the location honest, since we have nothing to gain from finding it in an costly place.
To straighten this out, water escaping a pressurized pipe creates a steady sound as it forces through a small opening.
Once we are on the job site, the line is drained and filled with a hydrogen and nitrogen mix, which is a safe, non toxic blend at the dilution used.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
Areas we serve
Our hands-on restoration team assess homes, businesses, and managed properties throughout Georgia and nearby communities.
View the area on Google Maps